Inverter not working

Can your inverter power your air conditioner?
July 27, 2020
Battery Life Of An Inverter
July 28, 2020
Show all

Inverter not working

An inverter is a very important device that everyone must own for their homes as well as the offices. This device helps you to get electricity in the most important appliances when there is no power otherwise.  But what if your inverter encounters some problems and thus doesn’t work properly? Thus it is best to know the common inverter problems along with their solutions so that you can resolve the issues yourself. They are given as follows:

1. Inverter not turning on

Inverter not turning on is one of the most common inverter problems. The few possible causes for the same include tripped inverter, battery disconnected, battery terminals loose, weak battery, discharged battery or battery terminals are reversed, etc.  In case the power switch is defective you need to call a technician.  In case of a faulty battery, it needs to be replaced,  however, if the inverter is tripped then you may need to press the trip reset button given on the

device to reset it. If your battery has gone weak, then it is advisable that you charge it for a few hours.  However, if it is old, then it is a good idea to replace it altogether. If the terminals of the battery are loose, check them for corrosion and give them a good cleaning before clamping them firmly.

2. The battery is not getting charged

Another common inverter problem is the battery not getting charged.  One reason for this could be the battery has reached the end of life and in this case, it has to be replaced.  Other possible causes for this could be burnt rectifiers, melted fuses, and loose battery connection.  In these cases, you must either get professional help or check battery terminals for corrosion.

3. Shortened backup time

Another problem which an inverter can encounter is shortened backup time. This could be due to too much power consumption and in such a case, you may reduce the load. This problem could also arise if the battery is not properly charged or if the battery has lost electrolyte when you may need to top up the battery with distilled water regularly. Remember that the water level must be maintained between the maximum and minimum water limits.

4. Power inverter working in just the inverter mode

If this problem comes up, then either the input is not connected or the fuse must have melted.  Check the power cable and change the fuse respectively for the above-given reasons for a power inverter working just in the inverter mode. However, if the cause is an input protector being effective, then you must reset it.  An input protector is basically a protector circuit that saves the inverter in case of high voltage conditions. Some other causes for this common inverter problem include low input and high input etc. What happens is that in case of low input, the Inverter does not switch to the main power supply and hence works only in inverter mode. you may need to make sure that you choose a wide range from the UPS if this is the reason for the unit working in inverter mode only.  You can also get a stabilizer installed to fix the issue of voltage.

 5. Alarm beeping continuously

A lot of times, the alarm of the inverter may keep beeping continuously.  In such a case, the possible cause could be either overload on the inverter or a stuck cooling fan. Disconnect all the extra load in case of overload. If the problem still doesn’t get resolved, then you may have to take the inverter to the service center or contact a professional for help. Every inverter has a cooling fan which needs to run as long as the unit is operating. If the cooling fan is not able to maintain a temperature cool enough for safe working, the inverter will shut off automatically or it will give out an audible alarm to inform you that the device needs to be turned off. Similarly, if the fan gets stuck due to some reason and is not able to cool off the inverter, the unit will give out an alarm so as to notify you to shut it off.

6. Power inverter LCD displays false codes

Another common problem related to inverters which you may experience is LCD displaying false codes.  In this case, either there is some internal problem in which the inverter circuit may need to be replaced or there is an external issue. If the issue is external, then you may need to check the battery cables, the output and input wires and load, etc.

7.  Noise coming out from inverter

Sometimes, you may also hear some noises coming out from your power inverter. It is important to know that every inverter gives out some wind noise which is normal. However, if you hear the noise from the fan then your fan may need some cleaning through professionals. In some of these cases, the fan may need to be replaced as well to solve the issue.

Now that you know the various common inverter problems and their solutions, you can solve the issues yourself at home. However, if the problem is beyond your comprehension, then you can contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

Click to chat
Hello, i am here to assist you.
Hi, welcome to Niteo Limited, reach out to us today we are online to give you all the assistance you need and answer all your questions concerning inverters.