Disconnect extra load when not required

Power inverters utilize the energy stored in batteries and supply current to the electrical and electronic devices to keep them running during power cut. The more load or devices you use during power failure, more power will be sucked out of batteries and shorter will be the backup period. So, disconnect the extra loads when not required to extend the backup of inverter.

Use energy-saving devices

Go for energy-saving devices to reduce power consumption from inverter batteries. For example, an ordinary bulb uses 75% more energy than a CFL or LED bulb to provide the same amount of light.

Similarly, a ceiling fan with better copper wiring consumes lesser power than a fan with poor quality winding ( poor quality copper winding increases the resistance and increases the load on inverters).

Take good care of inverter batteries

1. Keep the battery terminals corrosion-free and rust-free. Rusting and corrosion are bad for battery performance. Rusting in terminals reduces the current flow to and from the battery. This restricted flow of current results in slow battery charging which ultimately reduces battery life and eventually effects your inverter back up. If the terminals get corroded pour hot water + baking soda solution on the corrosive area or use a toothbrush for cleaning. This will remove the corrosion. Once the terminals become corrosion-free, apply petroleum jelly on to the terminals, nuts, and bolts to avoid future corrosion.
2. It is very important to charge the inverter batteries correctly in order to maintain the backup. After installation use battery on a regular basis. If the power cut does not occur, discharge the battery completely once every month and then recharge it.
3. Check the water level of the battery every two months. Ensure that the water level is maintained between the maximum and minimum water limits. Always top up the battery with distilled water. Do not use tap water or rainwater as it contains excess minerals and impurities which affect the life and performance of the battery.
4. Change the batteries of your inverter if they are worn out. Over time batteries lose their designed capacity  thus reducing the backup. Buy good quality batteries that will last longer and also guarantee the correct charge storage capacity. Poor quality batteries fail prematurely and do not offer sufficient backup. Maintenance-free or sealed batteries are best suited as these won’t leak the electrolyte. There are other types of batteries as well like lithium batteries which can be used for back up. Tubular batteries are the most efficient batteries. They have a complex design, great efficiency, longer operational life (8+ years), and low maintenance.